Wiri, Auckland Tueโ€“Sat 10amโ€“4pm ยท Sun 11amโ€“4pm
Same Day Livestock Airfreight from $70 ยท free from $500 of livestock 09 281 1380
New Fauna Marin & Mantis Shipment Online & Instore Now!

Reef Tank Maintenance Schedule: Daily, Weekly, Monthly

EasternMarine Aquariums8 min read

Healthy mixed reef aquarium kept clean with a regular reef tank maintenance schedule

A reef tank maintenance schedule keeps small jobs from turning into big problems. Most reef tanks need a few minutes of checks every day, an hour or so of work each week, and a deeper clean of equipment once a month. This guide sets out a simple daily, weekly and monthly reef checklist you can print or copy, plus the jobs that only come round every few months, so your corals and fish stay in stable water all year.

Key takeaways

  • Daily: check temperature, top up evaporation with RODI water, make sure pumps and lights are running, and look over your livestock.
  • Weekly: test alkalinity, nitrate and phosphate, do a water change of about 10%, clean the glass and empty the skimmer cup.
  • Monthly: clean or replace filter media, rinse pump intakes and check all your equipment is working as it should.
  • Every few months: deep-clean pumps, replace RODI pre-filters as needed and send off an ICP test (we recommend every two months, ideally monthly).
  • Consistency beats intensity. Small, regular jobs keep water stable, and stable water is what reef tanks need most.

Why a reef tank maintenance schedule matters

Corals, fish and invertebrates cope far better with steady conditions than with sudden swings. Evaporation raises salinity, corals use up alkalinity and calcium, and fish food breaks down into nitrate and phosphate. None of this is a problem if you deal with it little and often. Leave it for a month and you end up chasing big swings, which is when corals stress and algae takes off.

A written schedule also helps you spot trends. If your alkalinity drops faster than it used to, or the skimmer suddenly pulls less, you notice it straight away because you are checking at the same time each week. If you are still setting up, start with our guide to setting up a marine reef tank in NZ, then come back to this checklist once the tank is running.

Cleaning reef tank glass with a magnetic algae cleaner as part of a reef tank maintenance schedule

Daily reef tank checks (5 minutes)

Daily jobs are mostly about looking. Do them at the same time each day, ideally when the lights are on so you can see your livestock properly.

  • Temperature: glance at the thermometer or controller. Most reef tanks are kept steady somewhere around 25โ€“26ยฐC. What matters most is that it stays stable rather than hitting an exact number.
  • Top-off: replace evaporated water with RODI (fresh) water, never saltwater. Only water evaporates, so topping up with saltwater pushes salinity up over time. An auto top-off unit makes this job much easier.
  • Equipment: check return pump, wavemakers, heater, skimmer and lights are all running and the sump level looks normal.
  • Livestock: count your fish at feeding time, watch for anyone hiding or not eating, and check corals are opening as usual. Remove any uneaten food or anything that has died.
  • Feeding: feed small amounts your fish finish within a couple of minutes. Overfeeding is the most common cause of nitrate and phosphate problems.

Weekly reef tank maintenance (about an hour)

The weekly session is where most of the real work happens. Pick a regular day and stick to it.

1. Test your water

Test alkalinity every week, and more often if you dose or keep lots of stony corals. Test nitrate and phosphate weekly too, and check calcium and magnesium every week or two. Write your results down so you can see trends. Our reef tank water testing guide covers target ranges and which kits to use.

2. Check salinity

Measure salinity with a refractometer or digital tester. Aim for a steady 35 ppt (about 1.025โ€“1.026 specific gravity). Calibrate your refractometer from time to time with a 35 ppt reference solution, as RODI water alone only checks the zero point.

3. Do a water change

A water change of around 10% a week (or 20% every fortnight) removes waste and replaces trace elements. Mix the new saltwater ahead of time so it is fully dissolved and matched to the tank's temperature and salinity before it goes in. Our step-by-step guide on how to mix saltwater for a reef tank walks through it.

Weekly water change on a reef tank with a siphon hose and buckets of fresh mixed saltwater

4. Clean the glass and empty the skimmer

Wipe algae off the glass with a magnetic cleaner or scraper before it hardens. Empty and rinse the skimmer collection cup and wipe the neck, because a dirty neck makes the skimmer pull less. If you use filter socks or filter floss, swap them out at least weekly (many keepers change socks every few days) so trapped waste is removed rather than left to break down.

5. Top up dosing containers and food

Check your doser containers, auto top-off reservoir and frozen food supply so nothing runs out mid-week.

Monthly reef cleaning jobs

  • Filter media: replace activated carbon roughly every month, or as the label suggests, and check phosphate media and other chemical media against the manufacturer's guidance. Regenerable media such as Seachem Purigen can be renewed following the instructions on the pack.
  • Pump intakes and wavemakers: clear intake guards and wipe off algae or coralline build-up so flow stays strong.
  • Light covers and lenses: wipe salt creep and splashes off light lenses or covers (with the light switched off and cool) so your corals get full output.
  • Salt creep: wipe salt off the tank rim, lids, power boards and cables. Salt creep near electrics is a safety risk.
  • Heater check: compare the heater's reading with a separate thermometer. A stuck heater can overheat a tank quickly.
  • Test kit check: look at reagent expiry dates and order refills before you run out.

Every 3โ€“6 months and yearly

  • Deep-clean pumps: take return pumps, wavemakers and the skimmer pump apart and soak them in a mild citric acid or vinegar solution to remove calcium build-up, then rinse well in fresh water before refitting. Follow the manufacturer's instructions for your model.
  • RODI unit: change sediment and carbon pre-filters as the maker recommends, usually around every six months (sooner with dirty tap water). Replace DI resin when the TDS reading after the resin is no longer zero, and replace the membrane when its rejection drops.
  • ICP test: an ICP test shows trace elements and pollutants that home kits can't. We recommend testing every two months, and monthly if you dose heavily or are chasing a problem.
  • Calibrate probes: recalibrate pH probes and controllers following the maker's schedule.
  • Spare parts check: make sure you have a spare heater, impellers and airline in case something fails on a weekend.

Printable reef checklist

Copy this table onto your phone or stick it inside the cabinet door.

How often Job Why it matters
Daily Check temperature, top up with RODI water, check equipment, look over livestock, feed sparingly Catches failures early and keeps salinity steady
Weekly Test alkalinity, nitrate and phosphate; check salinity; water change of about 10% Keeps chemistry stable and removes waste
Weekly Clean glass, empty skimmer cup, change filter socks or floss Removes waste before it breaks down
Every 1โ€“2 weeks Test calcium and magnesium Shows whether your dosing matches what corals use
Monthly Replace carbon, clean intakes and light lenses, wipe salt creep, check heater Keeps equipment efficient and safe
Every 2 months ICP water test (ideally monthly) Finds trace element gaps and pollutants
Every 3โ€“6 months Deep-clean pumps, change RODI pre-filters, calibrate probes Prevents breakdowns and keeps top-off water pure

Tips to make reef maintenance easier

  • Automate the boring bits: an auto top-off and a dosing pump take two of the most important jobs off your plate.
  • Keep a log: a notebook or an app with test results and dates makes problems easier to trace.
  • Keep a clean-up crew: snails, hermit crabs and shrimp help with algae and leftover food between cleans.
  • Don't chase numbers: make small, gradual changes. Big corrections often cause more stress than the original problem.
  • Stay safe: switch off and unplug equipment before putting your hands in the tank or cleaning pumps, and use drip loops on every cable.

For more ideas on keeping a reef healthy for the long term, read our top 10 tips for a thriving reef aquarium.

Shop your reef maintenance essentials

Stock up on the salt, cleaning tools, filter media and test kits that make your weekly routine quick and easy.

Marine Salt ยท Cleaning Tools ยท Filter Media ยท Water Testing

Frequently asked questions

How often should I do a water change on a reef tank?

Around 10% each week or 20% every fortnight suits most reef tanks. Heavily stocked tanks or tanks with high nitrate may benefit from more. The key is doing it regularly.

Can I top off my reef tank with saltwater?

No. Only fresh water evaporates, so top off with RODI water. Topping off with saltwater slowly raises salinity.

How long does weekly reef maintenance take?

For a typical home reef, about an hour a week including testing and a water change, plus a few minutes each day for checks. Larger systems and lots of stony corals take longer.

What should I do before going on holiday?

Do your weekly jobs a day or two before you leave, fill the top-off reservoir and doser containers, and ask someone to check the tank daily. Avoid making big changes right before a trip.

Which parameters matter most for a reef tank maintenance schedule?

Temperature and salinity daily or weekly, alkalinity weekly, nitrate and phosphate weekly, and calcium and magnesium every week or two. Our water chemistry guide explains each one in more detail.

Not sure what your tank needs? Come and talk to us at our Auckland store at Unit 21, 114 Wiri Station Road, Wiri, or contact our team and we'll help you set up a routine that suits your system.

Last reviewed: 20 November 2026.

10% off fish food

Food for your new fish?

Add Fauna Marin fish food to your order and save 10%. Choose a food and size to suit your fish.

Applies to the selected food. Cannot be combined with other discounts.